2 FP per user genertates Mismatch Error.
Document Actions
Currently it is recommended to use one finger per user.But Set FP count to 2 in the software.(How to set?)
If by chance u had enrolled 2 FingerPrint per user and r facing problems then u can try either of the one solution as mentioned below:
Solution 1> Re-enrolling the users using 1FP per user.The user should be enrolled using hammster.Before enrolling check the following settings:-
a. Security Level: 1:N Security Level:-8
1:1 Security Level:-5
b. Brightness : 40
c. Contrass: 20
e. Gain : 2
Solution 2> Reduce the 1:N Security Level to 5 or less then that depending upon the Mismatch Problem and the quality of the user finger.Also increase the Brightness to 45
Solution 3> If even after using the Solution 2 the problem is not getting solved then the only solution will be to modify the only FP user with some combination like FP And PW , or FP And RF.
Last modified 2008-01-17 18:17
Forgot your password?
New user?
BioEnable On Express Computer online ---->GPS on a growth path
