How I can enroll RF card(Mifare) users from NAC 2500M
Document Actions
1)Press the MENU key on the keypad of the NAC 2500 and enter inside the menu.
2)Select 1st option called as "User Registration" using UP or DOWN arrow key and
3)Press enter or you can even press key number 1. A sub menu will appear having single sub option called as "Register User" if the NAC 2500 is used in NL/NS mode. OR this sub menu will be having four sub options as below if the NAC 2500 is used in SO mode.
1. Register User.
2. Modify User.
3. Delete User.
4. Delete All.
4)Select Sub option "Register User" using UP or DOWN arrow key and press enter.
yoU will be prompted to select the type of the user you want to enroll ,wether Master or Normal. Make the appropriate selection and press enter.First user should always be master. It is highly recomended that the first user should be only Password (PW) user.
NAC 2500 Unit will ask you to enter "User ID". This ID should be unique. Enter ID and press enter.
Note:Set the User ID length and the "FP count" according to ur application and requirement before enrolling the users, because once the users are enrolled u will not be able to change the settings.
5)YoU will be prompted to enter Group ID.This entry is optional so you can press enter and move ahead.
Now a list of authentiaction types will appear. Like FP (Finger Print), PW (Password), RF(RF Card), FP & RF, FP & PW, FP & PW & RF , FP OR RF , FP OR PW ,FP OR PW OR RF etc..
6) Select the RF Option (3rd).
7) After selecting RF option then you will have to flash Mi-Fare card in front of the NAC 2500 twice , So your RF card user will be registed in the software..
Thanks
About Mifare system: mifare card smart card mifare 1k mifare cards contactless smart card mifare card mifare mifare reader command mifare write carte mifare door lock mifare rfid
Last modified 2008-01-17 18:18
Forgot your password?
New user?
BioEnable On Express Computer online ---->GPS on a growth path
